TL;DR
A compact USB-to-analog video adapter built around a single CH570 microcontroller can render grayscale text and simple graphics on a display. The design uses PWM for its video signal, and its creator found that timing and memory access were key constraints; PAL color output remains a possibility, not a demonstrated result.
A tiny board built around a single CH570 microcontroller converts USB data into basic analog video, producing grayscale text and simple graphics for a connected display. The project, reported by Hackaday, shows how a low-cost microcontroller can act as a rudimentary USB graphics device, though its output and performance are limited by video timing and signal-generation constraints.
Get the latest gadgets delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
The adapter is assembled on one small printed circuit board with the CH570 as its only active component, alongside a handful of passive parts. Its designer, identified as bitluni, shaped the board itself into both connectors: the USB-C plug is formed from the PCB, while copper-plated cutouts create a contact intended to fit a female RCA video port. Hackaday describes the design as costing about 20 cents, though that figure is not accompanied by a detailed bill of materials or purchasing conditions.
The device presents itself to a connected computer as a USB CDC device, a serial communications interface. Bitluni wrote software that uses it as a serial terminal, displaying text and rudimentary graphics on a television or other analog-video display. The video signal is generated using pulse-width modulation (PWM), rather than a dedicated graphics chip or video-output component.
Generating a stable picture depends on maintaining precise timing. The build uses a crystal oscillator to keep the signal synchronized with the display’s refresh rate. Hackaday reports that high-speed operations needed to run from SRAM; a performance drop was traced to the compiler placing code in flash memory. The board’s direct RCA contact also has a practical drawback: some ports have only one wire touching the connector’s inner pin, making the connection sensitive to how the board is oriented.
Building A Single-Chip USB GPU From USB to analog video
A single CH570 microcontroller turns USB serial data into grayscale text and simple graphics. The project demonstrates a compact proof of concept, with timing and memory access shaping its limits.
What the board does
It appears to a computer as a USB serial device, then generates basic analog video.
USB serial data
Software uses the connection as a simple terminal for text and rudimentary graphics.
Grayscale video
PWM produces monochrome text and simple shapes on an analog display.
One small board
The CH570 is the only active component; the PCB also forms the USB-C plug and RCA contact.
What keeps the picture stable
Precise timing and fast memory access matter to the video signal.
A crystal oscillator helps match the signal to the display’s refresh timing.
The report traced a performance drop to the compiler placing high-speed operations in flash memory.
Confirmed output and open limits
The project is a maker demonstration, not a general-purpose graphics card.
- Grayscale terminal text and simple graphics
- PWM analog video from the CH570 board
- PAL color via SPI and overclocking remains proposed
- Resolution, frame rate, compatibility, and power use are unreported
Basic Video From One Microcontroller
The project is a compact demonstration of a microcontroller doing a job usually associated with a graphics processor: generating a display signal. Its value is not high-resolution rendering or a replacement for a conventional GPU. Instead, it shows how simple graphics can be produced with very little hardware, potentially useful for experiments, small embedded interfaces, or learning about video timing and signal generation.
The design also highlights the trade-offs behind reducing hardware. A single-chip board and PCB-formed connectors keep the parts count low, but they leave little room for dedicated video circuitry or robust connector mechanics. Its monochrome, rudimentary output and orientation-sensitive RCA connection illustrate the difference between a working proof of concept and a general-purpose display adapter. The reported low cost is striking, but the available description does not establish what it would cost to manufacture or use reliably at scale.
For readers interested in maker hardware, the project offers a concrete example of how software, memory placement and clock accuracy can matter as much as the component count. In this design, a seemingly small compiler choice affected performance, while a crystal oscillator addressed the timing required to keep the image stable.
Products Worth Considering

Sony WH-1000XM4 Wireless Noise Cancelling Headphones (Silver)

Apple Watch Series 12 GPS 42mm Smartwatch

DJI Mini 4K Drone with 4K UHD Camera
As an affiliate, we earn on qualifying purchases.
From USB Serial Data to RCA Video
Graphics processors are commonly associated with rendering complex images, but the basic function of producing a display signal can be attempted with simpler hardware when the performance target is modest. Bitluni’s adapter takes that narrower approach: it receives data over USB and renders grayscale terminal text and basic shapes as analog video.
The project fits into a wider pattern of experiments by bitluni using microcontrollers for video output. Hackaday notes that bitluni has previously generated VGA using an ESP32 and has also built coprocessors from groups of microcontrollers. Those efforts provide relevant context, but they do not mean this particular CH570 board has the performance or capabilities of a conventional GPU.
During testing, a television set to wireless reception reportedly picked up a signal when a jumper wire was used with the PWM output. That observation led bitluni to explore other transmission approaches. Hackaday says that SPI combined with overclocking might allow PAL color transmission; this is a proposed direction, not a reported demonstration of working color video.
“The converter is built into one tiny PCB with only one active component, a CH570 microcontroller, and a few passive components.”
— Hackaday’s report on bitluni’s project
Color Output and Build Limits
The available report does not provide measured resolution, frame rate, image quality, compatibility across displays, or power consumption. It also does not detail the conditions behind the 20-cent cost estimate, so that number should be treated as a reported project cost rather than a verified production price.
It remains unclear whether the proposed SPI and overclocking approach can reliably produce PAL color video, or what trade-offs it would require. The account describes an experiment in which a television picked up a PWM signal transmitted by a jumper wire, but does not establish a dependable wireless-video mode. The RCA connection’s sensitivity to orientation is another limitation, and the report does not say whether a revised connector design is planned.
Testing the Proposed Color Mode
The next technical milestone, if development continues in that direction, would be demonstrating whether SPI and overclocking can generate a stable PAL color signal. Further testing would also be needed to characterize the board’s image output, timing and compatibility with different displays. No release schedule, product plan or additional test results are specified in the report.
For now, the confirmed result is narrower: a CH570-based USB device can render monochrome text and simple graphics through an analog video connection. Whether the design can move beyond that proof of concept—particularly to reliable color output—remains open.
Source: Hackaday
Key Questions
What does the single-chip USB GPU do?
It receives data over USB and generates basic analog video, including grayscale terminal text and simple graphics. It is a low-performance project, not a substitute for a conventional graphics card.
Which chip does the board use?
The board uses a CH570 microcontroller as its only active component, along with passive parts such as a crystal oscillator.
How does it produce an image?
The design generates its analog signal using pulse-width modulation. A crystal oscillator helps keep the signal synchronized with the display’s refresh timing.
Can it output color video?
Color output has not been confirmed. Hackaday reports that bitluni thought SPI and overclocking might enable PAL color, but does not describe a completed demonstration.
Is the reported 20-cent price a retail cost?
No retail price or manufacturing estimate is provided. The roughly 20-cent figure is reported for the project, without a detailed bill of materials or explanation of cost assumptions.
Source: Hackaday
